Cabletron Systems SSIM-A2-01 Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 88

background image

71

SmartStack SSIM-A2-01/SSIM-A8-01

BGAK PDU
BGREJ PDU
END PDU
ENDAK PDU
POLL PDU
STAT PDU
USTAT PDU
RS PDU
RSAK PDU
ER PDU (not if UNI 3.0)
ERAK PDU (not if UNI 3.0)
Action: Check configuration. Does the configured UniVersion match the one
supported by the ATM switch? If not, fix it. Alternatively, this may be caused by a
poor physical link - check it.

0402 SSCOP: VT(CC) = MaxCC - Unsuccessful command

retransmission

Maximum number of retransmissions of a control command PDU have been
performed, without success. The control command PDU is one of the following:
BGN
END
RS
ER (not if UNI 3.0)
Action: This may be caused by a detached/moved physical link (cable), or a poor
quality physical link - check it. It may be caused by the switch being inoperational
(maybe due to it restarting) - check it. Alternatively, it may (in case of the ER PDU)
be caused by a UniVersion configuration mismatch with the ATM switch’s
supported UNI version - check it.

0403 SSCOP: Timer_NO_RESPONSE expiry - No response to POLLs

During the time period defined by Timer_NO_RESPONSE, we have not received
any response to any of the POLL PDUs we have sent. Action: This may be caused
by a detached/moved physical link (cable), or a poor quality physical link - check
it. It may be caused by the switch being inoperational (maybe due to it restarting) -
check it.

0404 SSCOP: SD PDUs lost - N(S) error in SD or POLL PDU

A SD or POLL PDU has been received containing an unexpected value in the N(S)
field. This means that SD PDUs must have been lost. Link recovery is being
performed and Signalling protocol is notified.
Action: The physical link may be poor - check it.

0405 SSCOP: STAT PDU - N(PS) error

A STAT PDU has been received, containing an unexpected value in the N(PS)
field. Link recovery is being performed and Signalling protocol is notified.

«
...
78
79
80
81
82
...
»

Содержание SSIM-A2-01

























































































Отзывы:

Нет отзывов

Похожие инструкции для SSIM-A2-01

Express Ethernetwork DI-704P

Бренд: D-Link Страницы: 2

Бренд: F5 Страницы: 2

Бренд: F5 Страницы: 90

Бренд: F5 Страницы: 47

Бренд: Harman Kardon Страницы: 66

Бренд: Quick Eagle Networks Страницы: 4

Бренд: FOR-A Страницы: 72

TWR-SB0410-36EVB

Бренд: NXP Semiconductors Страницы: 26

Бренд: Quectel Страницы: 23

Бренд: Bridgeworks Страницы: 18

Бренд: hilscher Страницы: 154

Бренд: ZALMAN Страницы: 4

DSL5068EN(1T1R)

Бренд: Aztech Страницы: 40

Бренд: Renesas Страницы: 20

Бренд: Eicon Networks Страницы: 32

Бренд: insys icom Страницы: 4

Бренд: H3C Страницы: 3

LBON320AC Series

Бренд: Lindsay Broadband Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды