Buell 2009 XB Series, Руководство по обслуживанию

Страница: 601 / 712

B.2 WIRING DIAGRAMS
WIRING DIAGRAM INFORMATION
Wire Color Codes
Wire traces on wiring diagrams are labeled with alpha codes.
Refer to
Table B-2 .
For Solid Color Wires: See Figure B-1 . The alpha code
identifies wire color (3).
For Striped Wires: The code is written with a slash (/) between
the solid color code and the stripe code (4). For example, a
trace labeled GN / Y is a green wire with a yellow stripe.
Wiring Diagram Symbols
See Figure B-1 . On wiring diagrams and in service/repair
instructions, connectors are identified by a number in brackets
(1). The letter (2) inside the brackets identifies whether the
housing is a socket or pin housing.
A=Pin: The letter A after a connector number and the pin
symbol (6) identifies a pin housing.
B=Socket: The letter B after a connector number and the
socket symbol (5) identifies a socket housing.
Other symbols found on the wiring diagrams include the symbol
for a diode (7), a symbol for a wire-to-wire connection (8), a
symbol verifying that no connection (9) between two wire traces
exists, symbols for actual (10) and virtual (11) splices, and a
symbol identifying two wires that are twisted together (12).
Actual splices (10) are splices where two wires are connected
together at a specific location along a wire. Virtual splices (11)
are splices shown connected anywhere along a wire, usually
used in a wiring or schematic diagram for clarity.
9
12
1 2
1 2
8
11
10
7
6
5
3
4
TN
TN
W
W
GN/Y
GN/Y
1 2 4
1 2 4
[21A]
[21B]
ed01711
1. Connector number
2. Terminal code (A=pin, B=socket)
3. Solid wire color
4. Striped wire color
5. Socket symbol
6. Pin symbol
7. Diode
8. Connection
9. No connection
10. Physical splice
11. Virtual splice
12. Twisted pair
Figure B-1. Connector/Wiring Diagram Symbols (typical)
Table B-2. Wire Color Codes
WIRE COLOR ALPHA CODE
Blue BE
Black BK
Brown BN
Green GN
Gray GY
Light Green LGN
Orange O
Pink PK
Red R
Tan TN
Violet V
White W
Yellow Y
HOME
2009 XB Service: Appendix B Wiring B-3