Buell 2009 XB Series, Руководство по обслуживанию

Страница: 368 / 712

1
2
3
sm00865
1. Fuse block and electrical relays
2. Electronic control module
3. Bank angle sensor
Figure 4-21. Bank Angle Sensor: Ulysses
INSTALLATION
Firebolt
1. Position bank angle sensor on headlight bracket. Make
sure locating post on sensor engages hole in mounting
tab.
2. Install bank angle sensor to mounting tab with fasteners
and new locknuts. Tighten fastener to 12-36 in-lbs (1.4-4
Nm).
3. See Figure 4-22 . Install bank angle sensor connector [134]
(1).
4. Install front fairing. See 2.47 FRONT FAIRING, WIND-
SHIELD, AND MIRRORS: FIREBOLT .
5. Connect negative battery cable, tightening to 72-96 in-lbs
(8-11 Nm).
After installing seat, pull upward on seat to be sure it is
locked in position. While riding, a loose seat can shift
causing loss of control, which could result in death or
serious injury. (00070b)
6. Install seat.
1
2
sm00862
1. Bank angle sensor
2. Headlights
Figure 4-22. Bank Angle Sensor: Firebolt
Lightning
1. See Figure 4-23 . Install bank angle sensor connector [134].
2. Position bank angle sensor on seat latch bracket. Make
sure locating post on sensor engages hole in mounting
tab.
3. Install bank angle sensor to mounting tab with fasteners.
Tighten fastener to 12-36 in-lbs (1.4-4 Nm).
4. Connect negative battery cable and tighten fastener to
72-96 in-lbs (8-11 Nm).
After installing seat, pull upward on seat to be sure it is
locked in position. While riding, a loose seat can shift
causing loss of control, which could result in death or
serious injury. (00070b)
5. Install seat.
HOME
4-16 2009 XB Service: Fuel System