Buell 2009 XB Series, Руководство по обслуживанию

Страница: 269 / 712

11
10
6
7
8
2
4
3
9
5
1
sm03746
7. 1. Fuel line connection Coil
2. 8. Coil connection [83] Throttle position sensor connection [88]
9. 3. IAT sensor [89] Coil wire harness retaining clip
4. 10. Throttle cables Engine temperature sensor connection [90]
11. 5. Oxygen sensor connection [137] Fuel injector connections [84 & 85]
6. IAC sensor connection [87]
Figure 3-5. Fuel Line, Connections and Throttle Cables
NOTES
• It will be necessary to remove plastic clip (3) securing coil
wire to throttle cable bracket and move harness out of the
way in order to loosen jamnuts on the throttle cables for
engine removal.
• It will be necessary to remove the sensor connectors from
the retainer securing them to the main frame above the
rear cylinder head.
13. Disconnect the following sensors:
a. Temperature sensor [90] (10).
b. Oxygen sensor [137] (11).
14. Disconnect throttle cables from induction module/throttle
body.
NOTE
In order to remove the rear drive belt, it will be necessary to
remove all existing belt guards.
15. Remove rear belt and idler pulley. See 5.7 DRIVE BELT
AND IDLER PULLEY .
16. Remove transmission sprocket. See 5.17 TRANSMISSION
SPROCKET .
NOTE
For details on the interactive exhaust system, see
6.17 INTERACTIVE EXHAUST SYSTEM .
17. Remove muffler. See 4.18 EXHAUST SYSTEM .
18. See Figure 3-8 . Remove oil filter (4).
NOTE
Secure right side rider footrest mount to the side of the motor-
cycle to prevent cosmetic damage.
19. Remove both side rider footrest and support plate. See
2.34 FOOTPEG, HEEL GUARD AND MOUNT: FIRE-
BOLT/LIGHTNING
or 2.49 AIR SCOOPS .
HOME
2009 XB Service: Engine 3-15