Buell 2009 XB Series, Руководство по обслуживанию

Страница: 105 / 712

5
6
1
4
3
2
sm00519
1. Long forcing screw
2. Wheel bearing
3. Front wheel bearing installer
4. Washer
5. Nice bearing
6. Nut
Figure 2-12. Installing Wheel Bearings
3. Insert a new wheel bearing (2) squarely into the hub, with
the lettered side facing out (away from the wheel).
4. Slide the FRONT BEARING INSTALLER (Part No. B-
43993-9, from kit Part No. B-43993-50A) (3) onto the for-
cing screw (1), with the smaller diameter toward the
bearing bore.
5. Install a washer (4), Nice bearing (5) and nut (6) onto the
forcing screw (1).
6. While holding the forcing screw (1), tighten the nut (6) until
the bearing is seated firmly against the shoulder inside
the bearing bore in the wheel hub.
7. Remove the nut, bearing, washer, front bearing installer,
and forcing screw.
2
1
sm00520
1. Forcing screw
2. Backing plate
Figure 2-13. Insert Forcing Screw and Backing Plate
8. See Figure 2-13 . Remove the backing plate (2) from the
long forcing screw (1). Reinstall the Backing Plate onto
the forcing screw, with the smaller diameter toward the
hex-head.
9. Insert the forcing screw through the wheel hub on the
opposite side of the wheel.
10. See Figure 2-14 . Install the spacer.
2
1
sm00521
1. Forcing screw
2. Spacer
Figure 2-14. Install the Spacer
HOME
2009 XB Service: Chassis 2-27