Mounting Instructions
Öhlins shock absorber kit BM 701
for BMW K 1200 RS, front
© Öhlins Racing AB. All rights reserved. Any reprinting or unauthorized use without the
written permission of Öhlins Racing AB is prohibited. Printed in Sweden.
Öhlins shock absorber 36 D
Your Öhlins shock absorber type 36 D features
the following adjuster:
Spring pre-load adjuster
Adjustments are made by turning the threaded
ring on the shock absorber body. Use the tool
provided. Clockwise for harder adjustment,
counter clockwise to release the pre-load.
NOTE!
When delivered the Öhlins shock absorber is dialed
to recommended settings for the specific brand
and make of the vehicle. If you have changed the
settings, see Setup data on the last page.
Spring
pre-load
adjuster
Öhlins Racing AB, Box 722, S-194 27 Upplands Väsby, Sweden.
Phone +46 8 590 025 00. Fax +46 8 590 025 80.
www.ohlins.com
Part No. BM 701. Issued 05 05 25
Setup data
Shock absorber length
319 mm
Shock absorber stroke
82 mm
Spring pre-load
7 mm
Checking sag and ride height
Front suspension
F1. Bike on a stand with the
suspension fully extended
= ............
F2. Bike on the ground without rider = ............
F3. Bike on the ground with rider
= ............
Free sag
F1 - F2 = ............
Ride height
F1 - F3 = ............
Rear suspension
R1.Bike on a stand with the
suspension fully extended
= ............
R2.Bike on the ground without rider = ........... .
R3.Bike on the ground with rider
= ............
Free sag
R1 - R2 = ............
Ride height
R1 - R3 = ............
Bike on a stand.
F1
R1
Bike on the ground.
F2
R2
Bike with rider on.
F3
R3
