Brocade Communications Systems Network Advisor 12.0.0, Руководство пользователя

Страница: 911 / 1505

Brocade Network Advisor SAN User Manual 863
53-1002696-01
Port VLANs
26
4. Enter the following information:
For IOS VLAN Properties:
-
Name—Displays the name of the VLAN, which is editable.
-
QoS—Select a QoS level from the list.
•
Select Low (None or 0) through High (7) for NetIron CES products. Select None for
NetIron CER and NetIron CES products if the product does not have VLAN priority
configured. (None applies only to NetIron CER and NetIron CES products.)
•
Select Low (0) through High (7) for all other Brocade IP products.
-
Spanning Tree—Select the type of spanning tree protocol from the Spanning Tree list. The
list options include STP, RSTP, and None.
-
Router Interface—If you want to add a virtual routing interface to the VLAN, enter the
virtual routing interface number in this field. You can add an IP address to the virtual
routing interface once the VLAN is deployed.
•
From the Product View tab, you can configure one virtual routing interface per VLAN
for each product.
•
From the VLAN View tab, you can edit virtual routing interfaces on multiple products
for a specific VLAN.
The Router Interface field is editable for products that support routing and have a router
image of the firmware installed.
-
Transparent VLAN Flooding (NetIron 5.4 and later)—Selecting this check box allows
packets to be forwarded without any form of CPU intervention including MAC learning and
MAC destination lookups.
NOTE
Because this feature floods all VLAN packets in hardware, it is not expected to work in
conjunction with routing functions.
For FOS VLAN and NOS VLAN Properties
-
Name—Displays the name of the VLAN, which is editable.
-
Admin Status—Displays one of the following administrative statuses for the VLAN interface
from the following options:
•
Up—The special routing interface is up and can route traffic from other VLANs.
•
Down—The special routing interface is down and cannot route traffic from other
VLANs.
-
FCoE—Indicates whether Fibre Channel over Ethernet (FCoE) is enabled or disabled on the
VLAN.
5. Click OK to save the changes.