Brocade Communications Systems Network Advisor 12.0.0, Руководство пользователя

Страница: 269 / 1505

Brocade Network Advisor SAN User Manual 221
53-1002696-01
Performance Dashboard monitors
8
•
Last 12 Hours — Displays data for the previous 12 hours beginning when you launch the
dashboard.
•
Last 24 Hours — Displays data for the previous 24 hours beginning when you launch the
dashboard.
3. (Top or Bottom performance monitors only) Select the number of products to include in a
selected measure by entering a number in the For Top N, Bottom N Monitors, N= field.
Valid values are from 1 through 25. The default is 10.
4. Configure the monitor to show only values greater than or less than a specified value by
completing the following steps.
a. Select the Show values check box.
b. Select greater than or less than from the list.
c. Enter a value in the field.
5. Configure threshold numbers and associated colors by completing the following steps.
You can define three threshold numbers in decreasing order and four threshold colors. The
default values are as follows: 90 and above displays red; 75 and above displays orange; 60
and above displays yellow; and all others display blue.
a. Select the check box.
b. Enter a number in the field.
c. Click the color square to launch the Color dialog box.
•
To pick a color from a swatch, select the Swatches tab. Select a color from the display.
•
To specify a color based on hue, saturation, and brightness, click the HSV tab. Specify
the hue (0 through 360 degrees), saturation (0 through 100%), value (0 through
100%), and transparency (0 through 100%).
•
To specify a color based on hue, saturation, and lightness, click the HSL tab. Specify
the hue (0 through 360 degrees), saturation (0 through 100%), lightness (0 through
100%), and transparency (0 through 100%).
•
To specify a color based on values of red, green, and blue, click the RGB tab. Specify
the values for red (0 through 255), green (0 through 255), blue (0 through 255), and
alpha (0 through 255).
•
To specify a color based on values of cyan, magenta, yellow, and black, click the CMYK
tab. Specify the values for cyan (0 through 255), magenta (0 through 255), yellow (0
through 255), black (0 through 255), and alpha (0 through 255).
•
To reset to the default color, click Reset.
6. Click OK to save your changes.