Brocade Communications Systems Network Advisor 12.0.0, Руководство пользователя

Страница: 317 / 1505

Brocade Network Advisor SAN User Manual 269
53-1002696-01
SAN topology layout
9
Changing the product label
To change the product label, complete the following steps.
1. Select a product in the Connectivity Map or Product List.
2. Select View > Product Label, and select one of the following options:
•
Name (Product). Displays the product name as the product label.
•
WWN. Displays the world wide name as the product label.
•
IP Address. Displays the IP address as the product label.
•
Domain ID. Displays the domain ID as the product label.
•
Zone Alias. Displays the zone alias as the product label.
Changes apply to all fabrics present in the topology when the Product Label option is selected.
Changing the port label
To change the port label, complete the following steps.
1. Select a port in the Connectivity Map or Product List.
2. Select View > Port Label, and select one of the following options:
•
Name. Displays the name as the port label.
•
Port. Displays the port number as the port label.
•
Port Address. Displays the port address as the port label.
•
Port WWN. Displays the port world wide name as the port label.
•
User Port #. Displays the user’s port number as the port label.
•
Zone Alias. Displays the zone alias as the port label.
All port labels within the fabric to which the selected item belongs change to the selected port
label type.
Changing the port display
You have the option of viewing connected (or occupied) product ports, unoccupied product ports, or
attached ports.
NOTE
Connected (or occupied) ports are those that originate from a device, such as a switch. Attached
ports are ports of the target devices that are connected to the originating device.
1. Select View > Port Display, and select one of the following options:
•
Occupied Product Ports. Select to display the ports of the devices in the fabrics (present in
the Connectivity Map) that are connected to other devices.
•
Unoccupied Product Ports. Select to display the ports of the devices (shown in the
Connectivity Map) that are not connected to any other device.
•
Attached Ports. Select to display the attached ports of the target devices.
•
Switch to Switch Connections. Select to display the connections between devices.
Switch-to-switch connections only display when the Attached Ports option is also selected.