Brocade Communications Systems Network Advisor 12.0.0, Руководство пользователя

Страница: 1070 / 1505

1022 Brocade Network Advisor SAN User Manual
53-1002696-01
Event custom reports
32
FIGURE 447
Add/Edit Report Definition dialog box - Result Settings tab
NOTE
The Available Column list lists the attributes you can include in the report. Each attribute
represents a column on the report.
5. Select the attribute you want, then click the right arrow to move your selection to the Selected
Columns list. To remove an attribute from the Selected Columns list, select the attribute that
you want to remove, then click the left arrow button.
•
If you selected the Count column, the Management application adds the First Seen and
Last Seen columns to a report.
•
For products that support stacking, the Port column shows the port.
6. Data for all attributes is sorted in ascending order and is sorted in the sequence that the
attributes appear in the Sort By Columns list. In the Selected Columns list, select which
attribute will be used to sort the generated report. Then click the right arrow button to move
your selection to the Sort by Columns list. To remove an entry from the Sort by Columns list,
select the entry, then click the left arrow button.
7. Click OK to save the definition, Run to launch the report, or click the Identification tab to
display the parameters that you use to identify the definition.
Defining the report identity
The Event Custom Reports dialog box, Identification tab allows you to enter the identity information
of the report information. Complete the following steps to define the report identity.
1. Select Reports > Event Custom Reports.
The Event Custom Reports dialog box displays.