Brocade Communications Systems Network Advisor 12.0.0, Руководство пользователя

Страница: 366 / 1505

318 Brocade Network Advisor SAN User Manual
53-1002696-01
SMI Agent Configuration Tool
11
1. Click the Authentication tab.
FIGURE 117
Authentication tab
2. Select the Enable Client Mutual Authentication check box, as needed.
If the check box is checked, CIM client mutual authentication is enabled. If the check box is
clear (default), client mutual authentication is disabled.
3. Select the Enable Indication Mutual Authentication check box, as needed.
If the check box is checked, indication mutual authentication is enabled. If the check box is
clear (default), indication mutual authentication is disabled.
4. Click Apply.
NOTE
Changes on this tab take effect after the next CIMOM server restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 12.X.X > Server Management Console).
5. Click Close to close the SMIA Configuration Tool dialog box.
Configuring CIMOM server authentication
CIMOM server authentication is the authentication mechanism between the CIM client and the
CIMOM Server. You can configure the CIMOM server to allow the CIM client to query the CIMOM
server without providing credentials; however, the CIMOM server requires the Management
application credentials to connect to the Management application server to retrieve the required
data. Therefore, if you select no authentication, you must provide Management application
credentials to retrieve data from the Management application server.
To configure CIMOM server authentication, complete the following steps.