Brocade Communications Systems Network Advisor 12.0.0, Руководство пользователя

Страница: 1060 / 1505

1012 Brocade Network Advisor SAN User Manual
53-1002696-01
Pseudo events
32
3. Click the Flapping button to create a flapping policy, and then enter the number of occurrences
and the duration of time before the Management application performs the action specified in
an event action. Specify the number of flapping times in minutes or seconds.
The flapping policy checks to see if the event consistently transitions between two opposite
states during a specified length of time. If it does, then the specified action in the definition is
performed.
Refer to “Creating an event action with a pseudo event on the flapping policy” on page 1019
for complete instructions.
4. Enter a description in the Message field. This description is displayed in the event log for this
pseudo event. The event log displays the exact text you enter in this field; therefore, this
message should describe the events in the event action policy.
5. Select a severity from Severity list. You must assign a severity to the pseudo event.
6. Click Next.
The Events pane of the Add Pseudo Event dialog box, shown in Figure 445 , displays.
Related topics
Refer to the following topics for specific procedures using this dialog box.
•
“Creating pseudo event definitions” on page 1010
•
“Editing a pseudo event definition” on page 1014
Filtering pseudo event traps
The Events pane contains a Selected Down Trap list and a Selected Up Trap list. The Selected Down
Trap list defines the traps for the down state of a product or an interface. The Selected Up Trap list
defines the traps for the up state of the product or an interface.
NOTE
By default in a SAN+IP configuration, all traps known to the Management application are included
in the Available Traps list, under the folders for the MIB to which they belong.
1. Select Monitor > Event Processing > Pseudo Events.
The Pseudo Events dialog box displays.
2. Click Add.
The Events pane of the Add Pseudo Event dialog box is shown in Figure 445 .