Brocade Communications Systems Network Advisor 12.0.0, Руководство пользователя

Страница: 349 / 1505

Brocade Network Advisor SAN User Manual 301
53-1002696-01
AAA Settings tab
11
Configuring server authentication
If you are using a server for authentication, make the following preparations first:
•
Make sure that the server you want to use is on the network that the Management application
manages.
•
Make sure that the external server and its user accounts have been properly configured. For
example, you must define roles and areas of responsibility (AOR) in the external server to
match the Management application roles and AOR.
To configure server authentication, complete the following steps.
1. Select the AAA Settings tab.
2. For Primary Authentication, select Server.
FIGURE 109 AAA Settings tab - server
3. Add or edit a server by referring to “Configuring a server” on page 302.
4. Rearrange the servers in the table by selecting a server and click the Up or Down
button to move it.
5. Delete a server by selecting the server and click Delete.
6. Test the established active connection with the server by clicking Test.
The Test Authentication dialog box displays.
7. Enter your user ID and password and click Test.
Test verifies your user ID and password for the local database and verifies user privileges on
the Management application server.
8. Set secondary authentication by selecting one of the following options from the Secondary
Authentication list:
•
Local Database
•
None