Brocade Communications Systems Network Advisor 12.0.0, Руководство пользователя

Страница: 902 / 1505

854 Brocade Network Advisor SAN User Manual
53-1002696-01
VLAN Manager
26
Configuration requirements for VLAN Manager
Before you can manage VLANs with VLAN Manager, you must complete the following tasks:
•
Make sure that the discovery process has been run. Discovery captures configuration
information from Brocade products and places that information in the Management
application database. Refer to
Chapter 4, “Discovery” for details on running discovery.
•
Make sure the VLAN Manager privilege is in your Management application user role or account
if you need to use VLAN Manager.
•
If you want to view VLAN connectivity in the Layer 2 topology, make sure Foundry Discovery
Protocol (FDP) or Link Layer Discovery Protocol (LLDP) is enabled on the devices on the
network.
Displaying a list of VLANs
To view the list of VLANs that were discovered on the network, select Configure > VLANs.
The VLAN View tab of the VLAN Manager dialog box displays.
The VLAN Manager toolbar contains the following buttons:
•
Add—Launches the Add VLAN dialog box.
•
Edit—Launches the Edit VLAN dialog box.
•
Delete—Launches the Delete VLAN dialog box.
•
STP—Allows you to configure STP, RSTP, or MSTP information for a product, port, or VLAN.
•
ACL—Launches the ACL Configuration dialog box, where you can assign access control lists to a
VLAN.
•
802.1ag CFM—If the Management application manages at least one of the service provider
products (NetIron XMR, MLX, CES, or CER), this button launches the 802.1ag CFM
configuration dialog box.
•
Virtual Port IP—Launches the IP Address dialog box, which allows you to add an IP address to a
Switch Virtual Interface (SVI) on DCB products (also known as a Virtual Routing Interface).
•
Deployments—Launches the Deploy VLANs dialog box and displays only saved VLAN and STP
deployments.