Brocade Communications Systems ICX 7250, Руководство по установке оборудования

Страница: 78 / 119

Management
System component Description
Console RJ-45 serial port
Management interface One 10/100 Ethernet, out-of-band management interface (RJ-45 port)
LEDs
System component Description
Power status LEDs Ex.y: 16 bicolor LEDs indicate 54 V power status for the PoE or PoE+ channels
Rx.y: 16 bicolor LEDs indicate 12 V power status for redundant power
NOTE
x = 1 through 8 and y = 1 through 2
System status LED CONFIG: Bicolor LED (green/amber) indicates the configuration mode
Management port status LEDs 2 green LEDs indicate status and activity
Other
System component Description
RESET Reset button for hardware reset without power cycling. There is a hole in the front panel to allow access. Sets
EPS4000 to factory default settings.
RJ-45 console port Console port for serial access to the device for management
Serial cable RJ-45 console cable
DB9 adapter DB9 adapter for serial connection
Weight and physical dimensions
Fully loaded: Populated with 4 RPS17 Power Supply Units (PSUs).
Model Height Width Depth Weight (empty) Weight (fully loaded)
EPS4000 4.37 cm
1.72 inches
43.7 cm
17.2 inches
40.6 cm
16.0 inches
4.87 kg
10.7 lb
8.35 kg
18.4 lb
Environmental requirements
Condition Operational Non-operational
Ambient temperature -5°C to 50°C (23°F to 122°F) -25°C to 70°C (-13°F to 158°F)
Relative humidity (non-
condensing) 5% to 95% at 50°C (122°F) 5% to 95% at 70°C (158°F)
Altitude (above sea level) 0 to 3,000 m (10,000 feet) 0 to 12,000 m (39,000 feet)
Shock 20 G, 11 ms, half-sine wave 33 G, 11 ms, half-sine wave
Vibration 1 G sine, 0.4 gms random, 5-500 Hz 2.4 G sine, 1.1 gms random, 5-500 Hz
Heat dissipation Refer to RPS17 specification section in Brocade ICX 7250
Switch Technical Specifications on page 101
N/A
Operating noise Single PSU installed: 46.5 to 48.3 dBA N/A
Installing the EPS4000
Brocade ICX 7250 Switch Hardware Installation Guide
78 53-1003898-02