manualshive.com logo in svg

Brocade Communications Systems ICX 7250, Руководство по установке оборудования

Поделиться
Скачать
Brocade Communications Systems ICX 7250 Скачать руководство пользователя страница 28

Installing the device using the included two-post rack mount kit

Use this procedure to install the device to a 2-post rack using the rack-mount ears that are included with the device.

DANGER

Make sure the rack housing the device is adequately secured to prevent it from becoming unstable or falling over.

NOTE
You need a #2 Phillips screwdriver for rack mount installation.

Complete the following steps to mount devices in a rack. The example shows a front-mounting.

1.

Remove the rack mounting kit from the shipping carton. The kit contains two L-shaped mounting brackets and two sets of
eight sink-head screws.

2. Using a Phillips screwdriver, attach the mounting brackets to the sides of the device using eight #6-32 sink-head screws, four

screws on each side.

NOTE
The #6-32 sink-head screws are for front-mounting. Use the #8-32 screws for rear-mounting.

FIGURE 12 Attaching the rack mounting brackets for the ICX 7250

3. Remove the two-post rack kit from the shipping carton. The kit contains four rack-mounting screws and four cage nuts.
4. Insert the cage nuts in the two-post rack where you want to mount the device.
5. Using a Phillips screwdriver, mount the device in a two-post rack using four rack-mounting screws.

Installation

Brocade ICX 7250 Switch Hardware Installation Guide

28

53-1003898-02

Содержание ICX 7250
























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды