manualshive.com logo in svg

Brocade Communications Systems ICX 7250, Руководство по установке оборудования

Поделиться
Скачать
Brocade Communications Systems ICX 7250 Скачать руководство пользователя страница 23

Installation

∙

Items included with the ICX 7250 device........................................................................................................................................................... 23

∙

Configuration requirements........................................................................................................................................................................................ 23

∙

Summary of installation tasks.................................................................................................................................................................................... 24

∙

Installation precautions...................................................................................................................................................................................................24

∙

Preparing the installation site......................................................................................................................................................................................25

∙

Installing the device..........................................................................................................................................................................................................26

∙

Connecting devices in a traditional stack.............................................................................................................................................................59

∙

Powering on the system................................................................................................................................................................................................62

DANGER

The procedures in this manual are for qualified service personnel.

DANGER

Before beginning the installation, see the precautions in “Power precautions.”

CAUTION
Disassembling any part of the power supply and fan assembly voids the warranty and regulatory certifications. There are no
user-serviceable parts inside the power supply and fan assembly.

Items included with the ICX 7250 device

ICX 7250 devices ship with all of the following items included in your shipping container. Verify the contents of your shipping container.
If any items are missing, contact the place of purchase.

∙

ICX 7250 device

∙

Rack mounting kit containing two L-shaped mounting brackets and two sets of eight sink-head screws

∙

Wall mounting kit containing two wall-mount screws and two plastic anchors

∙

Two-post rack kit containing four rack-mounting screws and four cage nuts

∙

One AC power cord (US only)

∙

Power cord retainer clip

∙

Console cable

∙

DB9 adapter

∙

Four rubber feet

∙

China ROHS sheet

∙

Read Me First document

Configuration requirements

To manage the ICX 7250, you need a management station, such as a PC running a terminal emulation application, for serial connection
to the device.

Use the serial connection to perform basic configuration tasks, including assigning an IP address and network mask to the system. This
information is required to manage the system using the CLI through Telnet or Brocade Network Advisor.

Brocade ICX 7250 Switch Hardware Installation Guide

53-1003898-02

23

Содержание ICX 7250
























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды