manualshive.com logo in svg

Brocade Communications Systems ICX 7250, Руководство по установке оборудования

Поделиться
Скачать
Brocade Communications Systems ICX 7250 Скачать руководство пользователя страница 9

Online

Telephone

E-mail

Preferred method of contact for non-urgent
issues:

∙

My Cases

 through MyBrocade

∙

Software downloads

 and licensing

tools

∙

Knowledge Base

Required for Sev 1-Critical and Sev 2-High
issues:

∙

Continental US: 1-800-752-8061

∙

Europe, Middle East, Africa, and Asia
Pacific: +800-AT FIBREE (+800 28
34 27 33)

∙

For areas unable to access toll free
number: +1-408-333-6061

∙

Toll-free numbers

 are available in

many countries.

[email protected]

Please include:

∙

Problem summary

∙

Serial number

∙

Installation details

∙

Environment description

Brocade OEM customers

If you have purchased Brocade product support from a Brocade OEM/Solution Provider, contact your OEM/Solution Provider for all of
your product support needs.

∙

OEM/Solution Providers are trained and certified by Brocade to support Brocade

®

 products.

∙

Brocade provides backline support for issues that cannot be resolved by the OEM/Solution Provider.

∙

Brocade Supplemental Support augments your existing OEM support contract, providing direct access to Brocade expertise.
For more information, contact Brocade or your OEM.

∙

For questions regarding service levels and response times, contact your OEM/Solution Provider.

Document feedback

To send feedback and report errors in the documentation you can use the feedback form posted with the document or you can e-mail
the documentation team.

Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and completeness of this document.
However, if you find an error or an omission, or you think that a topic needs further development, we want to hear from you. You can
provide feedback in two ways:

∙

Through the online feedback form in the HTML documents posted on 

www.brocade.com

.

∙

By sending your feedback to 

[email protected]

.

Provide the publication title, part number, and as much detail as possible, including the topic heading and page number if applicable, as
well as your suggestions for improvement.

Preface

Brocade ICX 7250 Switch Hardware Installation Guide

53-1003898-02

9

Содержание ICX 7250
























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды