Bosch Rexroth IndraMotion MTX 11 VRS, Руководство по применению, Страница: 259 / 304

It saves a completed measurement with all settings related to
axis selection, feed and radius.
<F5> Load measurement
It loads a measurement to the current measurement to com‐
pare them with each other. The scaling of the measurement
loaded is adapted to the current measurement.
<F6> Print result
Calling print preview. The document can be printed. The con‐
figuration data is also printed.
<F7> Zoom
It changes to another F-keypad "Zoom"
<F8> Back to configuration
It changes back to the configuration screen.
<F9> Quadrant - error correction
It opens the "Quadrant Error Correction" dialog
There are the following possibilities in the zoom area:
<F3>
Select curve
It switches between the two loaded curves.
<F4> Cursor backward
It can move the cursor backward in the zoomed curve with re‐
gard to time.
<F5> Cursor forward
It can move the cursor forward in the zoomed curve with regard
to time.
<F7> Zoom level back
It shows the zoom area selected before.
<F8> Zoom 1:1
Zoom 1:1 shows the whole measurement on the screen.
<F9> Back to the default F-keys.
Quadrant error correction This dialog is used to enter the drive parameters P435 - P439 for error correc‐
tion at the quadrant intersections of the circle. To change the parameters, the
drive has to be in "Closed Loop" and the optional servo package needs to be
switched on.
The following quadrant error correction dialog opens:
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation Bosch Rexroth AG 257/301
Extended Functionality