Bosch Rexroth IndraMotion MTX 11 VRS Скачать руководство пользователя страница 167

Страница: 167 / 304

M-key

Function

<R4>

Monitoring data display

<R5>

Worn tools with wear data display

Fig.8-6:

M-key assignment for tool lists

M-keys can be configured in the following files in IW Engineering:

Right M-keypad:

HMI.MKeys.MTXToolList_R.Visu.xml
HMI.MKeys.MTXToolList_R.xml

Left M-keypad:

HMI.MKeys.MTXToolList_L.Visu.xml
HMI.MKeys.MTXToolList_L.xml

Fig.8-7:

M-key definitions in the tool editor

If no M-keypads were assigned to the tool list definition, "global" M-keys come

into effect.

8.2.4

Tool List Display

List Contents

Here, 'list content' is understood to be the selection of the indicated tool data

records.
The query definitions in the "ToolManagementApp.xml" file specify which data

records are to be indicated in a tool list.
In the MTX, the F- or M-keys can be freely assigned up to 16 predefined list

indications in the F- or M-key configurator. Additional list indications are pos‐

sible, but are not provided in the configuration dialog. They need to be entered

manually in the configuration file of the respective F-keypads or M-keypads
(see definition "HMI.Fkeys.ToolmanApp1.xml" above).

Display formats

The list structure is controlled by a tool list configuration file that is entered in

the "ULCConfigFile" data element of the respective action definition in the

"ToolManagementApp.xml" file. Upon delivery the configuration file

"MTX.Toolman.ToolListConfiguration.xml" is always assigned to the tool lists.
By default, the tool lists have the following display methods:
●

Geometry list

●

Wear list

●

Tool life list

●

Status list

●

List of worn tools displayed as a endurance list.

As opposed to all other lists that display all the tools of the selected sectors,

this list contains a special query definition for selecting the worn tools.

Highlighted Display

It is possible to highlight tool data records in the tool list depending on a process

variable. As many displays as desired can be implemented
Example:
Highlighted Display

1. BQ2 - bit 0 (Tool active) background color 1
2. BQ2 - bit 4 (Tool worn) background color 2
3. etc.

DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation

Bosch Rexroth AG

165/301

Tool Management

Содержание Rexroth IndraMotion MTX 11 VRS

















































































































































































































































































































Результаты поиска

Содержание Rexroth IndraMotion MTX 11 VRS

Отзывы:

Bosch Rexroth IndraMotion MTX 11 VRS, Руководство по применению, Страница: 167 / 304

Результаты поиска

Содержание Rexroth IndraMotion MTX 11 VRS

Отзывы: