Bosch Rexroth IndraMotion MTX 11 VRS, Руководство по применению, Страница: 146 / 304

– or –
● Navigate with the <cursor> keys until the desired cell is selected.
– or –
● Navigate using the F-keys (see also chapter "function keys in the Table
Editor" on page 145 ).
The selected cell can be recognized from the dark blue background color.
Editing Values
Start Editing Mode Switching to the editing mode of the selected cell is carried out with one of the
following actions:
●
Entering a value or a character using the keyboard.
– or –
● Press <Enter>.
– or –
● Double-clicking the cell.
The editing mode is indicated by a flashing entry cursor in the respective cell.
Transferring a Value An edited value can be applied with one of the following actions:
●
Press <Enter>.
– or –
● Pressing the <Tab> key
– or –
● Press the <Cursor> key.
– or –
● Clicking on another cell with the mouse.
After the value has been transferred, the entered value is written directly to the
NC data table in the NC kernel.
If an incorrect value is entered, an error message is displayed in the
status line and the selected cell remains in the editing mode. The
entry can be cancelled or the value can be rewritten after correcting
the entry.
Canceling Value Entry The editing mode can be cancelled at any time as follows:
Pressing <Esc>.
The original value is retained in the table.
Additive Value Entry
The "Additive value entry" mode is used to enter correction values that are
added to the existing value.
Activate or Deactivate the Additive
Value Entry
"Additive value entry" an be activated/deactivated as follows:
Press <F5 Additive> repeatedly until the desired mode is active.
A checkmark on the F-key indicates that the "Additive value entry" mode is
active.
The "Additive value entry" is not intended to be used for every cell.
Whether "Additive value entry" is active for the selected cell is in‐
dicated by the text "ADD" in the status line.
Bosch Rexroth AG DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
144/301
Programming