Bosch Rexroth IndraMotion MTX 11 VRS, Руководство по применению, Страница: 208 / 304

The list on the left shows the NC→PLC signals while the one on the right shows
the PLC→NC signals for the selected signal group.
Each line in the list represents a signal. The signal numbering in the list starts
with 0.0.
The focused list is indicated by a blue frame.
Pressing <F6 Combined display> opens a list display to which the user can
assign any combination of signal types.
10.4.3 Operation and Navigation
The operation is executed via F-keys and <Cursor> keys.
The <cursor> keys are used to scroll within the list.
The <cursor> keys always act on the focused list.
Basic level of the F-keys On the basic level, the signal group can be selected, a list can be focused and
the application can be closed.
<F2> <F3> <F4> <F5> <F6> <F7> <F8> <F9>
Channel -
Signals Axis
Signals Spindle -
Signals Global
Signals Combined
display List
to focus Exit
Bit interface
Fig.10-20: Basic level of the F-keys
When a signal group is selected, the list is automatically focused and the as‐
sociated F-keypads are shown.
F-keys channel signals .
<F2> <F3> <F4> <F5> <F6> <F7> <F8> <F9>
C Channel - Channel -
Selection Change focus Basic
Level
Fig.10-21: F-keys channel signals
Pressing <F2> or <F3> displays the interface of the next/previous channel.
Pressing <F6> displays a dialog to select channels.
Pressing <F7> switches the focus between the lists.
Pressing <F9> jumps back to the basic level.
F-keys axis signals .
<F2> <F3> <F4> <F5> <F6> <F7> <F8> <F9>
Axis + Axis - Axis
Selection Focus
Change Basic
Level
Fig.10-22: F-keys axis signals
Pressing <F2> or <F3> displays the interface of the next/previous axis.
Pressing <F6> displays a dialog for selecting axes.
Pressing <F7> switches the focus between the lists.
Pressing <F9> jumps back to the basic level.
F-keys spindle signals .
Bosch Rexroth AG DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
206/301
Diagnostics