BLEMO ER24 Series, Руководство по программированию

Страница: 341 / 344

Index of Parameter Codes
Glossary
D
Display terminal
The dis play term inal m enus are s hown in s quare brackets.
For exam ple:
[Communication]
The codes are s hown in round brackets .
For exam ple: CO M-
Param eter nam es are dis played on the dis play term inal in s quare brackets .
For exam ple:
[Fallback Speed]
Param eter codes are dis played in round brackets .
For exam ple: LFF
E
Error
Dis crepancy between a detected (com puted, m easured, or s ignaled) value or condition and the
s pecified or theoretically correct value or condition.
F
Factory setting
Factory s ettings when the product is s hipped
Fault
Fault is an operating s tate. If the m onitoring functions detect an error, a trans ition to this operating
s tate is triggered, depending on the error clas s . A "Fault res et" is required to exit this operating
s tate after the caus e of the detected error has been rem oved. Further inform ation can be found in
the pertinent s tandards s uch as IEC 61800-7, ODVA Com m on Indus trial Protocol (CIP).
Fault Reset
A function us ed to res tore the drive to an operational s tate after a detected error is cleared by
rem oving the caus e of the error s o that the error is no longer active.
M
Monitoring function
Monitoring functions acquire a value continuous ly or cyclically (for exam ple, by m eas uring) in order
to check whether it is within perm is sible limits. Monitoring functions are us ed for error detection.
Glossary
P
Parameter
Device data and values that can be read and s et (to a certain extent) by the us er.
341
14