BLEMO ER24 Series, Руководство по программированию

Страница: 284 / 344

Interface (ItF)
284
Code Nam e / De s cription
MCF- [3.3 MONITORING CONFIG]
Code Nam e / De s cription
PbS-
[PARAM. BAR SELECT]
[AI1] in V
[AI2] in V
[AI3]
in mA
[AO1] in V
[ETA s tate world]
[Alarm groups]
[Fre quency ref.] in Hz: parameter displayed in factory configuration
[Output frequency] in Hz
[M otor current]
in A: parameter displayed in factory configuration
[M otor s peed] in rpm
[M otor voltage] in V
[M otor power]
in W
[M otor torque] as a %
[M ains voltage] in V
[M otor thermal s tate]
as a %
[Drv. the rmal s tate] as a %
[Cons umption] in Wh or kWh depending on drive rating
[Run tim e ]
in hours (length of time the motor has been sw itched on)
[Pow er on time] in hours (length of time the drive has been sw itched on)
[IGBT alarm counter] in seconds (total time of IGBT overheating alarms)
[M in. freq time]
in seconds
[PID re fe rence] as a %
[PID fe e dback] as a %
[PID e rror]
as a %
[PID Output] in Hz
[Config. active ]
CNF0, 1 or 2 (see page 232 )
[Utilis e d param. s et]
SET1, 2 or 3 (see page 230 )
Select the parameter using ENT (a then appears next to the parameter). Parameter(s) can also be
deselected using ENT.
1 or 2 parameters can be selected.
Example:
Parameters described in this page can be accessed by:
ITF- > MCF-
PARAM. BAR SELECT
MONITORING
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -