Bionet BM1, Руководство пользователя

Страница: 27 / 141

Rev. 2.2
27
Battery Power
DC adapter, it uses battery power when power failure and portable use.
The battery is attached to the bottom of the equipment and the additional extended battery is
connected to the left side.
Operation
1. Battery Power LED is lighted on when the equipment is in use.
2. Battery is automatically charged when the equipment is connected to DC adaptor.
(Charging is displayed at the top right of the screen.)
3. The charging status of the battery is displayed on the screen in a green box with 5 levels.
(5% -> 25% -> 50% -> 75% -> 100%)
4. When all batteries are discharged, the battery image is displayed in red.
5. When the battery is disconnected from the device and the battery is faulty, an ‘X’ appears
inside the shape of the battery.
6. The monitor automatically turns off when the battery is depleted.
The table below describes the function of the battery charging bar graph at the top of the screen.
Battery charge/discharge display
Display Charging remain time Description
Your battery is fully charging Not applicable
Your battery is fully charged Not applicable
Your battery is 75% charged Not applicable
Your battery is charged at 50%
If possible, connect it to the AC
adapter.