Bionet BM1, Руководство пользователя

Страница: 117 / 141

Rev. 2.2
117
WARNIING
To avoid contaminating or infecting personnel, the environment or other equipment, make
sure you disinfect and decontaminate the monitor appropriately before disposing of it in
accordance with your country's laws for equipment containing electrical and electronic parts.
For disposal of parts and accessories such as thermometers, where not otherwise specified,
follow local regulations regarding disposal of hospital waste.
Maintenance Task and Test Schedule
All maintenance tasks and performance tests are documented in detail in the service
documentation.
Maintenance and Test Schedule Frequency
Monitor Tests
Safety checks. Selected tests on the basis of IEC
60601-1
At least once every two years, or as needed,
after any repairs where the power supply is
removed or replaced, or if the monitor has
been dropped
Monitor Maintenance
Replace backlight (integrated displays only)
35,000 - 40,000 hours (about four years) of
continuous usage, or as needed.
Parameter Module Tests
Performance assurance for all measurements
not listed below At least once every two years, or if you suspect
the measurement values are incorrect.
Parameter Module Maintenance
NBP calibration
At least once every two years, or as specified
by local laws.
Mainstream and sidestream CO2
calibration check At least once a year, or if you suspect the
measurement values are incorrect.
Battery Maintenance
Battery
See the section on Maintaining Batteries in
chapter 1.