Bionet BM1 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 141

Bionet BM1 Скачать руководство пользователя страница 31

Rev. 2.2

31

Conditioning Guideline

The battery in the monitor full charged and discharged every six months and condition it using the
battery charger.

Storage Guideline

Store the battery outside of the monitor at a temperature between 20°C to 25°C (68°F to 77°F).

When the battery is stored inside a monitor that is powered by an AC power source, the battery
cell temperature increases by 15°C to 20°C (59°F to 68°F) above the room’s ambient temperature.
This reduces the life of the battery.

When the battery is stored inside a monitor that is continuously powered by an AC power source
and is not powered by battery on a regular basis, the life of the battery may be less than 12 months.
Bionet recommends that you remove the battery and store it near the monitor until it is needed
for transport.

How to Recycle the Battery

When the battery no longer holds a charge, it should be replaced. The battery is recyclables. Remove
the old battery from the monitor and follow your local recycling guidelines.

WARNING

EXPLOSION HAZARD

DO NOT incinerate the battery or store at high temperatures. Serious injury or death could
result.

«
...
29
30
31
32
33
...
»

Содержание BM1














































































































































Отзывы:

Нет отзывов