Bionet BM1, Руководство пользователя

Страница: 58 / 141

Rev. 2.2
58
:
Blinking yellow alarm lamp on the front panel.
:
Blinking cyan alarm lamp on the front panel.
Audible alarm
Alarm priority BIONET IEC
HIGH 1 high sound per 5 seconds
5 consecutive beeps for every
5 seconds
MEDIUM 1 high sound per 15 seconds
3 consecutive beeps for every
15 seconds
LOW 1 low sound per 30 seconds 1 beep for every 30 seconds
ALARM Management
Users can change to various alarm modes using the alarm mode change key on the top front of
the monitor.
Change Alarm Mode:
To change alarm mode you can use the 'Alarm control key' on the side of the monitor.
Alarm mode changes from Normal → Audio Paused → Alarm Paused → Normal.
Press and hold the alarm control key for 3 seconds to switch from Normal to 'Audio Off' or 'Alarm
Off mode'
Audio_Paused:
The alarm is temporarily silenced for 1 minute to hold the audible alarm. A banner with the message
Audio Paused and a countdown timer are displayed on the screen. However, the visual alarm, that
is, the alarm status is still displayed on the screen. In this state, if a new alarm occurs during the
silence period of an alarm, or if the alarm condition continues to occur even after 1 minute, which