Bionet BM1, Руководство пользователя

Страница: 109 / 141

Rev. 2.2
109
type is changed.
MODULE OFF
It occurs when the equipment and
module are separated. Message
output
Verify module connections
, Service request
EtCO2 Measurement Failure
CO2 value is not output, or numerical error. Troubleshoot procedure
1. Check the connection between the main unit and the module
2. Check the module line connection with the filter line or airway
3. Replace filter line or airway
4. Service Request
NOTE
In the following monitoring conditions, the measured values may be inaccurate. Read the
measured values carefully.
1. When using this in an environment of using Nitrous Oxide gas of high concentration
2. When using this in an environment where abrupt temperature change takes place
3. When using this in an environment with severely high humidity
CAUTION

The measured values may be inaccurate when using this equipment for patients who
have very fast or irregular respiration.

When measuring CO2 from the patient under the anesthesia, check it when gas
mixture comes in. Otherwise, the measured result values may be inaccurate.

When using a anesthesia machine that uses a volatile anesthetic, CO2 values may be
inaccurate.