Bionet BM1 Скачать руководство пользователя страница 29

Страница: 29 / 141

Rev. 2.2

WARNING

Older or defective batteries will have significantly reduced capacity or operating time.

NOTE

To maximize battery performance for transport, keep the monitor connected until you are ready
to transport the patient. Reconnect the monitor immediately after transport.

Bionet recommends replacing the lithium ion battery after 24 months of use.

Battery life depends on usage. If battery life continues, battery life will decrease and frequency
of replacement will increase.

To prevent pre-discharge, recharge after the battery is discharged.

WARNING

Be careful of the polarity when replacing the battery.

We strongly recommend that you use the battery supplied by Bionet.

Using unauthorized batteries may damage the equipment.

NOTE

Charging is not possible at low power. (below 12V)

When replacing the battery, be sure to remove the DC adapter and replace it.

Содержание BM1














































































































































Результаты поиска

Содержание BM1

Отзывы:

Bionet BM1, Руководство пользователя, Страница: 29 / 141

Результаты поиска

Содержание BM1

Отзывы: