Bionet BM1, Руководство пользователя

Страница: 112 / 141

Rev. 2.2
112

Do not take a temperature measurement over a scar or open tissue.

Do not expose the product to temperatures below 20°C (68°F) or above 50°C (122°F)
or above humidity of 95% (≥95%RH).

Do not drop the thermometer as it may cause damage.

Do not take the temperature with this product near heat sources such as in direct
sunlight, near a fireplace or stove.

Do not use this product if it is not working properly, contact Bionet support.

There are no user serviceable parts the only service required is battery replacement
and general cleaning please follow instructions in this user guide.

If the product is not going to be used for an extended period of time please remove
the batteries and store the thermometer in a cool dry place.

This product is NOT waterproof. Direct contact with water or other liquids should be
avoided.

Do not leave the thermometer with infants or children at any time.

The protective glass over the lens is fragile, handle with care. Do not touch the glass
of the infrared lens with bare fingers.

Do not modify or repair the thermometer.

ASTM laboratory accuracy requirements in the display range of 22 to 40°C(71.6°F to
104.0°F) for IR thermometers is ±0.3°C(±0.5°F), whereas for mercuryin-glass and
electronic thermometers, the requirement per ASTM Standards E 667-86 and E 1112-
86 is ±0.1°C(±0.2°F)
CAUTION

The reliability of the measurement cannot be guaranteed if the temperature is
measured from parts of body that are not recommended (anywhere other than the
forehead or behind the earlobe).

Similar to other thermometers, measurement error may occur within a range of ±