Bionet BM1, Руководство пользователя, Страница: 16 / 141

Rev. 2.2
16
CAUTION
The Equipment should be placed far from generator, X-ray equipment, broadcasting
equipment or transmitting wires, so as to prevent the electrical noises from being generated
during the operation, When these devices are near the Equipment, it can produce inaccurate
measurements. For BM1 both independent circuit and stable grounding are essentially
required. In the event that the same power source is shared with other electronic equipment,
it can also produce inaccurate output.
NOTE
BM1 is classified as follows :

BM1 classifies as Class II, BF & CF concerning electric shock. It is not proper to
operate this Equipment around combustible anesthetic or dissolvent.

Noise level is A class regarding IEC/EN 60601-1 and the Subject of noise is A level
concerning IEC/EN60601-1-2
.
WARNING
Do not touch the patient while using the defibrillator. The user may be at risk.
When using the defibrillator, be careful about safety and use only the supplied cable.
WARNING
In case the Equipment does not operate as usual or damaged, do not use on patient, and
contact to the medical equipment technician of the hospital or the equipment supply division.