Bionet BM1, Руководство пользователя

Страница: 124 / 141

Rev. 2.2
124
To prevent damage to the equipment, do not use sharp tools or abrasives. Never immerse
the electrical connector in water or other liquids. When cleaning, be careful not to let the
liquid stick to the edge of the screen.
Patient’s Cable

Clean the patient cables with a gauze pad moistened with a soap solution.

To disinfect patient cables, wipe the cables with a gauze moistened with diluted alcohol or
a glutaraldehyde-based dis-infectant.

Ethylene oxide is suitable for intensive disinfection (almost sterilization), but it shows that
the service life of cables and lead wires is reduced.

Dry thoroughly with a lint-free cloth.
CAUTION
Do not use disinfectants that contain phenol as they can spot plastics. Do not autoclave or
clean accessories with strong aromatic, chlorinated, ketone, ether, or ester solvents. Never
immerse electrical connectors.
When cleaning, do not apply excessive pressure or bend the cable unnecessarily. Excessive
pressure can damage the cable.
Reusable SpO2 Sensor
Reuse Clean the SpO2 sensor by wiping it with soapy water gauze. Disinfect the sensor by wiping
with 70% alcohol solution. Allow the patient to dry completely with a lint-free cloth before applying
to the patient.
Capnostat Sensor
Wipe the sensor surface and sensor window with a damp cloth. Do not attempt to wet the sensor