Bio-Tek ELx800, Руководство оператора

Страница: 91 / 214

Define (Method, Map, Formula and Curve)
|
63
Standard Concentrations
The Standard Concentration field allows you to enter the predicted or expected
concentration value for each standard group. If
manual mapping was
selected, the replicate locations must also be defined.
C O N C N O F L O C A T I O N
S T D 1 : 0 R E P # 1 : A 0 1
• Use the numeric and alpha keys and the decimal point key to enter
standard concentration values. The range is 0.00001 to 999999. The entry
cannot exceed six characters including the decimal point.
•
If automatic mapping is selected, each replicate’s location is available
for viewing only. Pressing
ENTER advances to the concentration value
entry for the next standard.
• If manual mapping is selected, the location must be defined. Pressing
ENTER
from the standard concentration entry moves the cursor to the
LOCATION
field. Pressing ENTER from the
LOCATION
field advances to
the concentration value entry for the next standard.
Valid Well Locations
When defining the replicate locations, only the alpha keys are active for
the first character and numeric for the second and third characters. Valid
characters and numeric entries are based on the selected plate geometry.
The following table lists acceptable entries for well locations based on plate
geometry:
Plate Type Range
6-Well A01-B03
12-Well A01-C04
24-Well A01-D06
48-Well A01-F08
96-Well A01-H12
96H A01-H12
96M A01-H12
ELx800 Operator’s Manual