Bio-Tek ELx800, Руководство оператора

Страница: 180 / 214

152
|
Appendix A:
Controlling the Reader With KCjunior™ or KC4™
Problems
If KCjunior fails to communicate with the reader, and displays a serial
communications error, check the cable plug-in location to make sure it
matches the setup choices and is not a Null cable. If this is suspected, add
another Null and try again.
Getting Started With KCjunior™
The following instructions briefly describe how to read a plate using
KCjunior. Refer to KCjunior's Help system and User's Guide early and
often to learn how to create protocols, assign well identifiers, read plates,
print reports, and more.
To read a plate using KCjunior:
1. Click Read Plate from KCjunior's main screen. The Read Plate
Dialog will appear.
2. If desired, enter a Results ID and a Plate Description, and then click
Read Plate. The Protocol Definition dialog will appear.
3. Select a Read Method Type of Endpoint , Kinetic , or
Multiwavelength.
4. Define the wavelength(s) at which the plate will be read.
5. Select a Plate Geometry from the drop-down list.
6. Define other reading parameters as necessary. Click the Help button
for assistance.
7. When complete, click OK to return to the Read Plate dialog. If
desired, enter a Plate ID.
8. Place the plate on the carrier, then click OK to start the plate read.
The plate will be read and then the raw data results will display
in KCjunior. Print the raw data by selecting Plate|Print Results.
To analyze or manipulate results, a protocol should be defined.
Refer to KCjunior's Help system or User's Guide for instructions.
Bio-Tek Instruments, Inc.