Bio-Tek ELx800, Руководство оператора

Страница: 135 / 214

Qualification Procedures
|
107
System Test
IMPORTANT!
Do not turn on the instrument until
the carrier shipping block has been removed. Refer to
Chapter 2 .
The System Test is performed automatically whenever the instrument is
turned on. It can also be performed manually through the ELx800 Main
Menu.
The reader will “chirp” repeatedly if the power-on System Test results do
not meet the internally coded Failure Mode Effects Analysis (FMEA)
criteria established by Bio-Tek. A system test should then be initiated to try
to retrieve an error code from the reader.
To run the System Test from the instrument keypad:
1. If running a System Test, attach a printer to the instrument. See
Connecting a Printer to the ELx800 in Chapter 2 for
instructions.
2. From the Main Menu, select
UTIL
. The
SELECT UTILITY OPTION
screen will appear:
S E L E C T U T I L I T Y O P T I O N :
T E S T S S E T U P O U T P U T R E A D
3. From the
SELECT UTILITY OPTION
screen, select
TESTS
. The
SELECT TEST
screen will appear:
S E L E C T T E S T
S Y S T E M C H K S U M C A L P L A T E
4. Select
SYSTEM
to run the System Test.
To run the System Test using KCjunior™, open the Utilities menu
and select
Diagnostics| Reader System Test
.
To run the System Test using KC4™, open the System menu and
select Diagnostics| Run Optics Test .
The System Test report lists results in a Pass/Fail format ( Figures
16 and 17 ) and can be viewed, saved, and printed. Print the report
to document periodic testing or troubleshoot.
If the reader fails the System Test, it will not perform a read
until the error condition is cleared. See Chapter 6,
Troubleshooting and Error Codes , for a list of possible error
codes that may be displayed if the System Test indicates a
failure.
ELx800 Operator's Manual