Bio-Tek ELx800, Руководство оператора

Страница: 23 / 214

Hazards and Precautions
|
xix
ELx800 Operator's Manual
Based on the testing described below and information contained
herein, this instrument bears the CE mark.
Directive 89/336/EEC:Electromagnetic Compatibility
Emissions - CLASS A
IEC 61326-1:2002
EN 55022:2000 Class A, CISPR 16-1:1993, CISPR 16-2:1999
Immunity
IEC 61326-1:2000
EN 61000-4-2: Electrostatic Discharge
EN 61000-4-3: Radiated EM Fields
EN 61000-4-4: Electrical Fast Transient/Burst
EN 61000-4-5: Surge Immunity
EN 61000-4-6: Conducted Disturbances
EN 61000-4-11: Voltage Dips, Short Interruptions and Variations
Directive 73/23/EEC Low Voltage
EN 61010-1 (2001): “Safety requirement for electrical equipment for measurement,
control and laboratory use. Part 1, General requirements”.
Directive 2002/96/EC: Waste Electrical and Electronic Equipment
Disposal Notice
This instrument contains printed circuit boards and wiring with lead solder. Dispose
of the instrument according to Directive 2002/96/EC, “on waste electrical and
electronic equipment (WEEE).”
Directive 98/79/EC: In Vitro Diagnostics
•
Product registration with competent authorities
•
Traceability to the U.S. National Institute of Standards and Technology
(NIST):
Optical density measurements, and if equipped, incubator
temperature readings, are traceable to NIST.
Specific data for a particular serial number is available on request from Bio-Tek
Instruments. See page xi for contact information.