Bio-Tek ELx800, Руководство оператора

Страница: 89 / 214

Define (Method, Map, Formula and Curve)
|
61
Blank Location
The
BLANK LOCATION
screen allows you to define where the blank well or
wells occur on the microplate. This screen only appears if manual mapping
was selected.
E N T E R T H E L O C A T I O N O F
B L A N K # 1 : A 1 2
•
Use the numeric and alpha keys to enter a Blank Location, based upon
the plate geometry.
• Use the arrow keys to move the cursor to the next or previous editable
field. The cursor is positioned beneath the first editable field.
• Press ENTER to continue.
Number of Standards
This option allows you to enter the number of standard groups that will be
used in the assay. Any previously defined value will be displayed on the
screen.
Note: If the number of standards is altered, the number of
replicates for the standard automatically reverts to 1.
E N T E R N U M B E R O F
S T A N D A R D S : 0 2
• Use the numeric keys to enter the
NUMBER OF STANDARDS
. The valid
range depends on the selected curve fit method. The maximum number
of standards is 12. The minimum is 4 for 4-P fit, cubic, cubic spline, and
logit-log; 3 for quadratic; and 2 for linear and point-to-point.
• Press CLEAR to clear the value on the display.
• Press
ENTER
to continue.
ELx800 Operator’s Manual