Beckman Coulter Allegra X-30 Series, Инструкция по эксплуатации

Страница: 54 / 64

PN B05529AE
4-4
Care and Maintenance
Storage and Transport
Storage and Transport
Storage
Before storing a centrifuge for an extended period, return it to its original shipping container
to protect it from dust and dirt. Reinsert the shipping foam (removed at time of centrifuge
installation) into the chamber, making sure the drive shaft is stabilized in the hole in the foam.
Temperature and humidity conditions for storage should meet the environmental requirements
described in the specifications given in CHAPTER 1, Description .
Returning a Centrifuge
Before returning a centrifuge or accessory for any reason, prior permission must be obtained from
Beckman Coulter, Inc. Contact your local Beckman Coulter office to obtain the form and for
packaging and shipping instructions.
To protect our personnel, it is the customer’s responsibility to ensure that all parts are free from
pathogens and/or radioactivity. Sterilization and decontamination must be done before returning
the parts.
All parts must be accompanied by a signed note, plainly visible on the outside of the box, stating that they
are safe to handle and that they are not contaminated with pathogens or radioactivity. Failure to attach
this notification will result in return or disposal of the items without review of the reported problem.
Supply List
Contact Beckman Coulter Sales or visit www.beckman.com for information about ordering parts,
supplies, and publications. For your convenience, a partial list is given below.
Refer to the applicable rotor manual for materials and supplies needed for rotors.
Replacement Parts
Other
NOTE
For MSDS information, go to the Beckman Coulter website at www.beckmancoulter.com.
Description Part Number
Rotor tie-down screw 361367
T-handle wrench 361371