Beckman Coulter Allegra X-30 Series, Инструкция по эксплуатации

Страница: 16 / 64

PN B05529AE
xvi
Introduction
Conventions
• APPENDIX A, Installation contains instructions for installing and connecting the centrifuge.
NOTE
If the centrifuge is used in a manner other than specified in this manual, the safety and performance
of this equipment could be impaired. Further, the use of any equipment other than that recommended
by Beckman Coulter has not been evaluated for safety. Use of any equipment not specifically
recommended in this manual and/or the applicable rotor manual is the sole responsibility of the user.
Conventions
Certain symbols are used in the product labeling to call out safety-related and other important
information. These international symbols may also be displayed on the centrifuge and are
reproduced on the inside of the back cover of this manual.
Typographic Conventions
Certain typographic conventions are used throughout this manual to distinguish names of user
interface components, such as keys and displays.
• Key names (for example,
START
or
ENTER
) and display names (for example,
TEMP°C
or
SPEED
)
appear in bold type.
• Cursor keys , used to increment values up or down when setting parameters, are shown as up and
down arrows ( ▲ or ▼ ).
CFC-Free Centrifugation
To ensure minimal environmental impact, no CFCs are used in the manufacture or operation of
Allegra X-30 Series centrifuges.
Recycling Label
This symbol is required in accordance with the Waste Electrical and Electronic Equipment (WEEE)
Directive of the European Union. The presence of this marking on the product indicates:
1. the device was put on the European market after August 13, 2005 and
2.
the device is not to be disposed via the municipal waste collection system of any member state
of the European Union.
A28219-AA