Baumuller b maXX 1000, Руководство по параметрам

Страница: 108 / 210

Parameter description
Parameter manual b maXX
®
1000
Document no. 5.07004.03 Baumüller Nürnberg GmbH
108
of 208
4.3
P1159
Setting the bias polarity of the keypad potentiometer. For further information see
Z
P1158
–
from page 103.
P1160
Setting the gain of the keypad potentiometer. For further information see
Z
P1158
–
from
page 103.
P1161
For further information see
Z
P1158
–
from page 103.
P1162
This parameter sets the function of the AFM output 0 to +10 V
DC
(ACM is common), see
also
Z
P1163
–
from page 109.
P1159 Bedienfeld Potentiometer Offset Polarität 0 to 1
EE Keypad potentiometer bias polarity 0
ON BM_u_KeypadPotentiometerBiasPolarity 1:1
Value Meaning
0 Positive bias
1 Negative bias
P1160 Bedienfeld Potentiometer Verstärkung 0.1 to 100.0 %
EE Keypad potentiometer gain 100.0 %
ON BM_u_KeypadPotentiometerGain 1:1
P1161 Bedienfeld Potentiometer negativ AN/AUS 0 to 1
EE Keypad potentiometer negative enable/disable 0
STOP BM_u_KeypadPotentiometerEnable/Disable 1:1
Value Meaning
0 No negative bias command
1 Negative bias: REV motion enabled
P1162 Analoges Ausgangssignal 0 to 1
EE Analog output signal (AFM) 0
ON BM_u_AnalogOutputSignal 1:1
Value Meaning
0 Analog frequency meter (0 to maximum output frequency)
1 Analog current meter (0 to 250 % of rated current)