Baumuller b maXX 1000, Руководство по параметрам

Страница: 126 / 210

Parameter description
Parameter manual b maXX
®
1000
Document no. 5.07004.03 Baumüller Nürnberg GmbH
126
of 208
4.3
P1213
This parameter determines the operation mode of the drive after the over-torque (OL2)
error code 0509
hex
is detected via the following method: if the output current exceeds the
over-torque detection level
Z
P1214
–
longer than the setting of
Z
P1215
–
over-torque de-
tection time, the warning message „OL2“ is displayed. If a multi-functional output terminal
is set to over-torque detection (
Z
P1110
–
to
Z
P1117
–
= 04), the output is on. Please refer
to
Z
P1110
–
to
Z
P1117
–
for details.
P1214
This setting is proportional to the rated output current of the drive.
P1215
This parameter sets the time for how long over-torque must be detected before „OL2“ is
displayed.
P1213 Momenten-Überlast Erkennung 0 to 4
EE Over-torque detection mode 0
STOP BM_u_OverTorqueDetectMode 1:1 -
Value Meaning
0 Over-torque detection disabled
1 Over-Torque detection enabled during constant speed operation. After over-torque is
detected, keep running until I²t
Z
P1216
–
or OL (overload) occurs.
2 Over-Torque detection enabled during constant speed operation. After over-torque is
detected, stop running.
3 Over-Torque detection enabled during acceleration. After over-torque is detected, keep run-
ning until I²t
Z
P1216
–
or OL (overload) occurs.
4 Over-Torque detection enabled during acceleration. After over-torque is detected, stop run-
ning.
P1214
Momenten-Überlast Erkennung Grenze 10 to 200 %
EE Over-torque detection mode level 150
ON BM_u_OverTorqueDetectModeLevel 1:1 -
P1215 Momenten-Überlast Erkennung Zeit 0.1 to 60.0 s
EE Over-torque detection mode time 0.1 s
STOP BM_u_OverTorqueDetectModeTime 10:1 -