Barco FSN-1004, Руководство пользователя, Страница: 94 / 246

94 FSN-1004 • User’s Guide • Rev 00
4. Menu Orientation
Memory Menu
bå~ÄäÉ=aÉëÅêáéíáçåë
This section provides descriptions of each module’s Enables.
The following topics are discussed:
•
System Enables
•
Out Enables
póëíÉã=bå~ÄäÉë
The figure below illustrates the Enables when the SYS (System) module is selected:
Figure 4-28. SYS Enables
Following are descriptions of each System Enable:
•
{All Inputs} — stores or recalls all input setup parameters (including the name)
for inputs, as set on the Input Setup Menu . Refer to the “ Input Setup ” section on
page 117 for a menu description.
•
{Multi Viewer} — stores or recalls all multiviewer settings, as set on the
Multiviewer Setup Menu . Refer to the “ Multiviewer Setup Menu ” section on
page 137 for menu details.
lìí=bå~ÄäÉë
The figure below illustrates the available Enables when the Out module is selected. If an
Enable is grayed out, the SOC card must not be installed.
Figure 4-29.
Out Enables (sample)
Following are descriptions of each Out Enable:
•
{PGM 8-1} through {PVW 13-2} — stores or recalls the source assignment on the
selected outputs. For example, if U3-1: SDI is assigned to PVW 8-1 , that
association will be stored or recalled in the memory register.
Note All Enables can be toggled on or off, without restriction.