Barco FSN-1004 Скачать руководство пользователя страница 26

Страница: 26 / 246

FSN-1004 • User’s Guide • Rev 00

2. FSN-1004 Orientation

Hardware Description

e~êÇï~êÉ=aÉëÅêáéíáçå

The following topics are discussed in this section:

•

Chassis Overview

•

Card Slot Allocation

•

Chassis Front Door

•

Chassis Front

•

Chassis Rear

`Ü~ëëáë=lîÉêîáÉï

The FSN-1004 chassis permits a high degree of flexibility in terms of the number of inputs
and outputs. Please note:

•

All cards are modular and hot-swappable.

•

6RU chassis.

•

An internal “midplane” architecture with cards plugged in from both the front and
rear of the chassis.

•

There are no active components on the midplane or on the plug-in rear cards.

•

The front door provides a seal for air flow and chassis cooling. There are no
controls on the door, but two status LEDs are provided. Refer to the “

Chassis

Front Door

” section on page 28 for details.

•

The following additional features are provided:

Optional dual redundant hot-swappable power supplies.

One tally connector (24 contact closures).

One GPIO connector, with four input (GPI) and eight output (GPO) ports.

Two serial ports.

Содержание FSN-1004























































































































































































































































Результаты поиска

Содержание FSN-1004

Отзывы:

Barco FSN-1004, Руководство пользователя, Страница: 26 / 246

Результаты поиска

Содержание FSN-1004

Отзывы: