Barco FSN-1004, Руководство пользователя, Страница: 152 / 246

152 FSN-1004 • User’s Guide • Rev 00
4. Menu Orientation
System Menu
rëÉê=mêÉÑÉêÉåÅÉë=q~ÄäÉ
The figure below illustrates a sample User Preferences Table .
Figure 4-78.
User Preferences table (sample)
The User Preferences Table lists all available preferences, except for those provided in
the Tool Bar . The yellow highlight indicates the preference that can be changed. To move
the highlight, click on another row.
The following columns of information are provided:
•
Name — lists the name of the user preference.
•
Description — lists the range of the selected user preference.
•
Setting — lists the preference’s current setting.
The {Set} button always applies to the highlighted preference, and the value shown in the
button’s insert changes as different preferences are selected. Press {Set} to display the
keypad for the selected preference in the table, enabling you to change its value.
rëÉê=mêÉÑÉêÉåÅÉë=cìåÅíáçåë
The following user preferences are provided:
•
Black on Invalid Video — when an input is selected on a bus, this preference
controls how the system behaves when the input becomes invalid — such as
when the input loses sync or video.
~
On — shows black in place of the input signal, when the selected signal
becomes invalid.
~
Off — shows the input signal as is, when the selected signal becomes
invalid. In this mode, non-synchronous and/or non-stable video will
appear on the switcher’s output.
•
Memory Auto Lock — controls automatic locking of the memory register that you
have stored to. Default if Off.
Range : On (locked) or Off (unlocked)
•
Press {Set Clock} to set the system’s internal clock, which is used for various
logging, reporting and other time-stamping functions. The clock is also used on
various Multiviewer layouts.
When pressed, the Set Clock Keypad appears, with special keypad functions:
~
Ensure that you use the HH:MM:SS format to set the clock
(Hours:Minutes:Seconds).
~
Use the {:} button as a separator between digits.
Set
9
Important It is highly recommended that you leave the Black on Invalid
Video preference On during production. The Off mode may
be useful during setup mode only.
Set
Clock