Barco FSN-1004 Скачать руководство пользователя страница 157

Страница: 157 / 246

FSN-1004 • User’s Guide • Rev 00

157

4. Menu Orientation

System Menu

The right side of the

Palette

provides a matrix of all available test patterns, plus specific

buttons for

{Off}

and

{Raster Box}

To send a test pattern to an output, touch the desired BNC in the

Rear I/O View

section,

then touch the desired test pattern in the matrix.

The following 13

Test Patterns

are provided in the matrix:

•

H Ramp

•

V Ramp

•

100% Color Bars

•

75% Color Bars

•

16 x 16 Grid

•

32 x 32 Grid

•

Burst

•

50% Gray

•

Gray Steps 1

•

Gray Steps 2

•

White

•

Black

•

SMPTE Bars

The following functions are provided in the matrix:

•

Press

{Off}

to turn off the test pattern for the selected output.

•

Press

{Raster Box}

to enable or disable a raster box for the selected output. The

raster box width is fixed at 1 pixel. Note that the raster box can be enabled even
if the test pattern is off.

The following functions are provided in the

Tool Bar

•

Press

{Select All Outputs}

to highlight all outputs in the

Rear I/O View

section.

When you select a test pattern in the matrix, that pattern is sent to all outputs.

•

Press

{All Off}

to turn off all test patterns and all raster boxes on all outputs

simultaneously.

Select All

Outputs

All

Off

Содержание FSN-1004























































































































































































































































Результаты поиска

Содержание FSN-1004

Отзывы:

Barco FSN-1004, Руководство пользователя, Страница: 157 / 246

Результаты поиска

Содержание FSN-1004

Отзывы: