Barco FSN-1004, Руководство пользователя, Страница: 190 / 246

190 FSN-1004 • User’s Guide • Rev 00
6. Operations
Working with Memory Registers
Multiviewer layouts, etc.). Using the System “Enables,” you can elect to include or
exclude certain system sub-functions.
When you include the SYS button in a recall function, the system immediately
replaces all (or a portion of) the current System settings, based on your “enables.”
You can also modify the Enables, prior to pressing
ENTER .
The table below summarizes the functions you can perform in each mode:
píçêáåÖ=jÉãçêó=oÉÖáëíÉêë
When you store a memory register, you take a “snapshot” of the switcher and the selected
modules. Once stored, you can
not add data to that register — you can only overwrite it
with new data.

If you store All Output Destinations into register 100, you can not add
System data into that register. However, you could overwrite register 100
with new data.
Storing a memory register and setting Enables is an easy equation. This method stores
partial contents of the selected module(s).
•
STORE , [select register #] , [set Enables] , ENTER
The following topics are discussed in this section:
•
Store, Set Enables, Enter Custom Name
•
Memory Store Notes
píçêÉI=pÉí=bå~ÄäÉëI=båíÉê=`ìëíçã=k~ãÉ

Use the following steps to store a memory register, set Enables, and enter a custom
register description:
1. Set up the switcher in the exact configuration that you want stored.
2. In the GUI , go to the Memory page, highlight a register number line in the table,
and select STORE .
3. Open the Enables Menu by selecting the brown Enables Button at the bottom of
the screen. By default all Enables are "Off" for the System and Output modules.
4. Choose the light blue SYS or OUT modules and turn ON the desired items to be
saved in this register. Remember that you can also use the {All On} and {All Off}
functions.
Table 6-2. Memory Menu modes and functions
Memory Menu
Mode
Name
Registers Modules Enables
Lock
Registers
Delete
Registers
View Yes View Only View Only Yes Yes
Store Yes Modify Modify No No
Recall No Modify Modify No No
Note In Store Mode , the description will not appear in the register
table until ENTER is pressed on the Keypad .