Barco FSN-1004 Скачать руководство пользователя страница 126 | Manualshive

Страница: 126 / 246

Barco FSN-1004 Скачать руководство пользователя страница 126

126

FSN-1004 • User’s Guide • Rev 00

4. Menu Orientation

System Menu

information about a display device and its capabilities, including the preferred (as
well as the allowed) device resolutions.

Figure 4-55.

EDID Format Keypad

The selected input’s EDID file is stored in non-volatile memory. This file is read by
a computer's DVI graphics card during boot-up, when its DVI output is connected
to a DVI-I input connector on the FSN-1004. The FSN-1004 must be powered on
first for the EDID information to be read.

In the

EDID Format Keypad

, use the up (



) and down (



) arrows to locate the

desired EDID format in the list, then press

{Apply}

to program the EDID.

Please note the following additional important points:

~

The EDID on the

UIC

will be reprogrammed under the following

circumstances:

•

EDID settings are changed on the

UIC

Input Setup Menu

.

•

Factory defaults are restored on the system.

•

A “

SYS

” memory register is recalled which contains different

EDID settings.

•

A previous system configuration is restored in which different
EDID settings are present.

Note

This function is available for analog and DVI inputs only. The
button does not appear when an SDI input is selected on the

UIC

.

Important

This feature is designed for advanced users only. Do not
program the EDID unless it is necessary.

«
...
124
125
126
127
128
...
»

Содержание FSN-1004























































































































































































































































Отзывы:

Нет отзывов