Barco FSN-1004, Руководство пользователя, Страница: 67 / 246

FSN-1004 • User’s Guide • Rev 00 67
3. Installation
Signal Connections
the Input Setup Menu to set up universal input signals. In Chapter 4, refer to the
“ Input Setup ” section on page 117 for setup details.
•
In Chapter 5, refer to the “ Universal Input Setup ” section on page 172 for step-
by-step setup instructions.
•
Refer to the “ Analog Format Connection Table ” section on page 67 for a chart
of analog formats available when using a customer supplied breakout cable.
•
In Appendix A, refer to the “ Output Format Tables ” section on page 231 for a list
of available input formats for the FSN-1004.
•
The two SDI inputs enable you to connect SDI sources.
^å~äçÖ=cçêã~í=`çååÉÅíáçå=q~ÄäÉ
Each HD-15 analog connector on the UIC enables you to input a variety of video formats —
including VGA, composite video, S-video and YUV component video.
•
For RGB with H and V sync, use the HD-15 connector directly.
•
Using a customer supplied HD-15 to 5 x BNC breakout cable, several input
combinations are possible. Cells with check marks denote the connections
required for the indicated format.
Table 3-1. Analog Input Combinations using Breakout Cable
Breakout Cable
Wire Color
Composite
Video
S-Video
(Y/C)
YUV
(YP
b
P
r
)
RGB
Sync on Green
RGB
Comp Sync
RGB
Separate H V
R

(P
r
)
  
G
 
(Lum)

(Lum)
  
B

(Chroma)

(P
b
)
  
H Sync
 
V Sync
