Barco FSN-1004, Руководство пользователя, Страница: 186 / 246

186 FSN-1004 • User’s Guide • Rev 00
6. Operations
Quick Function Reference
nìáÅâ=cìåÅíáçå=oÉÑÉêÉåÅÉ
Use the following table to quickly access the proper section for specific operating
instructions. Both hyperlinks and page numbers are provided.
råÇÉêëí~åÇáåÖ=bêêçê=jÉëë~ÖÉë
Please note the following important rules regarding error messages.
•
LOS (loss of signal): On occasion, you can experience LOS (loss of signal) —
typically due to a poor video connection or computer connection.
If this condition occurs:
~
A red Error button appears in the upper left corner of the Touch Screen .
~
The input’s BNC turns red in the rear I/O view.
~
The input’s Programmable Display turns red.
During an LOS condition, if the user preference “ Black on Invalid Video ” is
turned on, black will replace the lost output video. In Chapter 4, refer to the “ User
Preferences Menu ” section on page 151 for details.
•
Invalid Video : On occasion, this message can appear if the input format does not
match the selected native resolution, or if the input signal is not locked to the
system’s video reference input.
If this condition occurs:
~
A red Error button appears in the upper left corner of the Touch Screen .
~
The input’s BNC turns red in the rear I/O view.
Table 6-1. FSN-1004 Quick Function Reference Table
To learn about: Use the Following Section: Page
Error messages Understanding Error Messages 186
Keypad operations Using the Keypad 188
Memory registers Working with Memory Registers 189
Multiviewer operations Multiviewer Operations 197
Pop-ups Working with Pop-ups 188
Quick setup and operation Quick Setup and Operations 184
Note
For the input connectors on the UIC , the “ red ” error
conditions only occur if the input has been mapped to the
panel, and the signal was previously OK.
LOS:
Slot 1
Input 3
Invalid:
Slot 1
Input 2